About Blades Special designs for bimetal band saw blades
Click Here to enter the main site
PD
design
positive rake angle for agressive cutting
for sawing rust and acid-resistant steels and exotic alloys
for medium and large cross-sections
PW design
excellent machining performance and edge life
for rust and acid-resistant steels and exotic alloys
shorter cutting times and a longer life with large material cross-sections
Range
availability
Sales
units:
coil length 30.5 m
manufacturing coils of 30-120 m, depending on the width
welded-to-length band saw blades
Item-Groups:
526,
529, 530 and 531
Band
width:
1
1/16, 1 3/8, 1 5/8, 2 1/8, 2 5/8, 3 1/8, 4 and 5 inches
Constant tooth pitches:
0,75 to 3 tpi
Variable tooth pitches:
0,55-0,75 to 3-4 tpi
Tooth form:
Hook Tooth (K)
Type of tooth set:
Raker
set (SD)
PE design
highest possible surface
finish because of the dual-sided ground tooth profiles
especially suited to sawing aluminum
Range
availability
Sales
units:
only
welded-to-length band saw blades
Item-Groups:
520 bis 531
Band
width:
1
1/16, 1 3/8, 1 5/8, 2 1/8 and 2 5/8 inches
Constant
tooth pitches: 3
to 18 tpi
Variable
tooth pitches: 3-4
to 10-14 tpi
Tooth
form:
S,
K
Type
of tooth set:
SD,
GS
SF design
(step set)
for large
profile girders and large self-stressing work pieces
due to wide cutting channel, pinching of the band saw blades is prevented
Range
availability
Sales
units:
coil
length 30,5 m
manufacturing coils of 30-120 m, depending on the width
welded-to-length band saw blades
Item-Group:
522
Band
width:
1
3/8, 1 5/8 and 2 1/8 inches
Variable
tooth pitches: 2-3
to 3-4 tpi
Tooth
form:
K