about blades		 bimetal band saw blades special designs

PD design
  • positive rake angle for agressive cutting
  • for sawing rust and
    acid-resistant steels
    and exotic alloys
  • for medium and large cross-sections
bimetal band saw blades special designs - PD design
Range availability
Sales units:
 coil length 30.5 m

manufacturing coils of 30-120 m, depending on the width

welded-to-length band saw blades
Item-Groups:
 526, 529, 530 and 531
Band width:
 1 1/16, 1 3/8, 1 5/8, 2 1/8, 2 5/8, 3 1/8, 4 and 5 inches
Constant tooth pitches:
 0,75 to 3 tpi
Variable tooth pitches:
 0,55-0,75 to 3-4 tpi
Tooth form:
 Hook Tooth (K)
Type of tooth set:
 Raker set (SD)

PW design
  • excellent machining
    performance and edge life
  • for rust and acid-
    resistant steels and
    exotic alloys
  • shorter cutting times
    and a longer life with large material cross-sections
bimetal band saw blades special designs - PW design

PE design
  • highest possible
    surface finish because
    of the dual-sided
    ground tooth profiles
  • especially suited to
    sawing aluminum
bimetal band saw blades special designs- PE design
Range availability
Sales units:
 only welded-to-length band saw blades
Item-Groups:
 520 bis 531
Band width:
 1 1/16, 1 3/8, 1 5/8, 2 1/8 and 2 5/8 inches
Constant tooth pitches:
 3 to 18 tpi
Variable tooth pitches:
 3-4 to 10-14 tpi
Tooth form:
 S, K
Type of tooth set:
 SD, GS

SF design (step set)
  • for large profile girders
    and large self-
    stressing work pieces
  • due to wide cutting
    channel, pinching of
    the band saw blades is prevented
bimetal band saw blades special designs- SF design (step set)
Range availability
Sales units:
 coil length 30,5 m

manufacturing coils of 30-120 m, depending on the width

welded-to-length band saw blades
Item-Group:
 522
Band width:
 1 3/8, 1 5/8 and 2 1/8 inches
Variable tooth pitches:
 2-3 to 3-4 tpi
Tooth form:
 K

back to menu